Programmable High Power Life Tester--系統規格表 (PHPL-5W-200-CP-SD) |
外型尺寸 Exterior dimension | 480 * 510 * 560 cm (W*H*D)(包含突出部份) |
標準Channel Standard Channel | A/B 端口 各10 Channel /模塊/360w (每臺zui大200channel) A/B Port each 10 channel/module/360w (max 200channel/set) |
zui大控制模塊數量 Maximum control Module | 10模塊/3.6kw 10 module/3.6kw |
設定方式 Method of Test setting | 設定模塊方式 (開始/停止) 每模塊A/B端口獨立控制,可設定不同電流與參數 Set module (start/stop) ; each module A/B single control ,can set different current &data |
輸出電壓/電流范圍 Output voltage/current range | 0~12V/ 0~1500mA(1mA/Step)/channel |
操作模式 Operation mode | 定電流 CC |
數據取樣速度與通訊界面 sample rate &com interface | 200ms (Sample to Controller) , 5sec (Sample to PC) & RS485 |
Continuous Mode ON-OFF Mode PULSE Mode | 可選擇連續輸出 可選擇ON-OFF脈波設定(0~999.9sec), cycle設定功能(5位數) 可選擇pulse模式;peak pulse current ;1/10 duty pulse width (1mS) |
電流設定/zui大試驗時間 Current Set/Max test time | Bias &測試電流---10CH(Bias電流設定 正電流 設定) / 9999.9Hr Bias & Test current –10CH(setting of bias positive current /test positive current setting) |
數據讀取&連結臺數 Data reading &link number of machines | 同時讀取/ 記錄各channel電壓/電流值/板溫/chamber溫濕度值 zui多32臺 read /record value of the voltage ¤t & temp. of channel and T/H values of each Chamber /max 32 Set |
輸出準確度與表頭分辨率 Output & indicator | 1%+-2mA & 0.1V/1mA |
電壓/電流 值 轉換圖形曲線 Voltage / Current values Conversion curve | 記錄電壓與電流值可轉換為圖形曲線 record the voltage and current values of each Channel can convert the Curve |
電壓/電流/板溫 分析 Voltage /Current/Temp. Analysis | 記錄 電壓/電流/板溫 開始 /取樣/ 結束時間 Recording of the start /sample/ end time of voltage/ current/ temp. |
EXCEL報表轉換 Excel report conversion | 條件設定數據, 量測數據,電壓短路數據轉換成EXCEL檔案 Set condition data, measurement data and voltage shortage datd converted as Excel file |
電源 Power Source | AC110/40A & 220V/20A , 50/60Hz
|